MELSEC-F Series Kontrol Posisi
Seri FX menawarkan PLC berbiaya rendah dengan instruksi pemosisian internal dan blok keluaran pulsa yang dapat melakukan kontrol pemosisian yang luas.
Selain itu, modul pemosisian khusus untuk kontrol kompleks dan kontrol interpolasi multi-sumbu juga tersedia.
Adaptor khusus keluaran berkecepatan tinggi
| Model | Number of controlled axis |
Maximum frequency |
Applicable FX PLC | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FX 3S |
FX 3G |
FX 3U |
FX 3GC |
FX 3UC |
|||||||||
 |
FX3U-2HSY-ADP | Independent two axes | 200 kHz | × | × | * ○ Max. 2 units |
× | × | |||||
- *Bila digunakan bersama adaptor analog atau komunikasi, diperlukan papan ekspansi fungsi.
Blok keluaran pulsa
| Model | Number of controlled axis |
Maximum frequency |
Applicable FX PLC | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FX 3S |
FX 3G |
FX 3U |
FX 3GC |
FX 3UC |
|||||||||
 |
FX3U-1PG | Independent one axis | 200 kHz | × | × | *3 ○ Max. 8 units |
× | *1*3 ○ Max. 6 units |
|||||
 |
FX2N-10PG
Discontinued |
Independent one axis | 1 MHz(1 Hz to 1 MHz differential line driver output) |
× | × | ○ Max. 8 units |
× | *1*2 ○ Max. 8 units | |||||
- *1Saat menghubungkan ke FX3UC, diperlukan FX2NC-CNV-IF atau FX3UC-1PS-5V.
- *2FX3UC-32MT-LT(-2): 7 unit. FX3UC-**MT/D, FX3UC-**MT/DSS, FX3UC-16MR/D(S)-T: 8 unit.
- *3FX3U, FX3UC didukung mulai versi 2.20 atau yang lebih baru.
SSCNET
| Model | Number of controlled axis |
Maximum frequency |
Applicable FX PLC | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FX 3S |
FX 3G |
FX 3U |
FX 3GC |
FX 3UC |
|||||||||
 |
FX3U-20SSC-H | Two axes (Independent/Simultaneous) |
- | × | × | ○ Max. 8 units |
× | *1*2 ○ Max. 8 units |
|||||
- *1Saat menghubungkan ke FX3UC, diperlukan FX2NC-CNV-IF atau FX3UC-1PS-5V.
- *2FX3UC-32MT-LT(-2): 7 unit. FX3UC-**MT/D, FX3UC-**MT/DSS, FX3UC-16MR/D(S)-T: 8 unit.
Memposisikan unit khusus
| Model | Number of controlled axis |
Maximum requency |
Applicable FX PLC | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FX 3S |
FX 3G |
FX 3U |
FX 3GC |
FX 3UC |
|||||||||
 |
FX2N-10GM | Independent one axis | 200 kHz | × | × | ○ Max. 8 units |
× | *1*2 ○ Max. 8 units |
|||||
 |
FX2N-20GM | Two axes (Independent/Simultaneous) |
200 kHz | ||||||||||
- *1Saat menghubungkan ke FX3UC, diperlukan FX2NC-CNV-IF atau FX3UC-1PS-5V.
- *2FX3UC-32MT-LT(-2): 7 unit. FX3UC-**MT/D, FX3UC-**MT/DSS, FX3UC-16MR/D(S)-T: 8 unit.
Untuk panel pengajaran pemosisian FX2N-10GM/FX2N-20GM
| Model | Product |
|---|---|
| E-20TP-SET0 (with E-20TP-CAB0) |
FX2N-10GM, FX2N-20GM |
| E-20TP-E-SET0 (with E-20TP-CAB0) |
Unit kontrol sudut
| Model | Number of controlled axis |
Maximum frequency |
Applicable FX PLC | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FX 3S |
FX 3G |
FX 3U |
FX 3GC |
FX 3UC |
|||||||||
 |
FX2N-1RM-SET*1 | One axis | 720 divisions/rotation (0.5 degree) or 360 divisions/rotation (1 degree) |
× | × | ○ Max. 3 units |
× | *2*3 ○ Max. 3 units |
|||||
| FX2N-1RM-E-SET*1 | |||||||||||||
- *1FX2N-1RM-SET adalah produk domestik Jepang saja. Untuk penggunaan di luar negeri, silakan pilih FX2N-1RM-E-SET, yang mendukung standar luar negeri.
- *2Kabel ekstensi tidak dapat digunakan.
- *3Saat menghubungkan ke FX3UC, diperlukan FX2NC-CNV-IF atau FX3UC-1PS-5V.
Fungsi keluaran pulsa internal PLC dan fungsi pemosisian
| Items | FX3S | FX3G, FX3GC | FX3U, FX3UC | |
|---|---|---|---|---|
| Number of axis | Two axes | [FX3G] Two axes (14/24 points) Three axes (40/60 points) [FX3GC] Two axes |
Three axes | |
| Number of controlled axis | Independent two axes | [FX3G] Independent two axes (14/24 points) Independent three axes (40/60 points) [FX3GC] Independent two axes |
Independent three axes | |
| Maximum frequency | 100 kHz | 100 kHz | 100 kHz | |
| Programming languages | Sequence programs | Sequence programs | Sequence programs | |
| Compatible main unit | Transistor output type main unit |
Transistor output type main unit |
Transistor output type main unit |
|
| Pulse output instruction |
Pulse Y Output (PLSY) |
○ | ○ | ○ |
| Acceleration/Deceleration Setup Pulse Y Output (PLSR) |
○ | ○ | ○ | |
| Pulse output type | Pulse train (Direction is controlled by PLC program) |
Pulse train (Direction is controlled by PLC program) |
Pulse train (Direction is controlled by PLC program) |
|
| Positioning instruction |
Absolute Current Value Read ([D]ABS) |
○ | ○ | ○ |
| Dog Search Zero Return (DSZR) |
○ | ○ | ○ | |
| Zero Return (ZRN) |
○*1 | ○*1 | ○*1 | |
| Variable Speed Pulse Output (PLSV) |
○ | ○ | ○ | |
| Drive to Increment (DRVI) |
○ | ○ | ○ | |
| Drive to Absolute (DRVA) |
○ | ○ | ○ | |
| Interrupt Positioning (DVIT) |
× | × | ○ | |
| Batch Data Positioning Mode ([D]TBL) |
× | ○ | ○*2 | |
| Pulse output type | Pulse train + direction | Pulse train + direction | Pulse train + direction | |
- *1Tidak ada fungsi pencarian DOG Perlambat saat DOG titik dekat AKTIF, dan berhenti saat DOG titik dekat NONAKTIF (Berbeda dari operasi pengembalian nol dengan hitungan sinyal nol).
- *2FX3UC-32MT-LT didukung mulai versi 2.20 atau yang lebih baru.
Suku cadang dan suku cadang opsional
Kabel sambungan motor servo
| Model | Length | Deskripsi | |
|---|---|---|---|
 |
E-GMH-200CAB | 2 m | [MR-H series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block. |
 |
E-GMJ-200CAB | 2 m | [MR-J series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block. |
 |
E-GMJ2-200CAB1A | 2 m | [MR-J2, MR-J2-Super series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. |
 |
E-GMC-200CAB | 2 m | [MR-C series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block. |
 |
E-GM-200CAB | 2 m | [General purpose connection cable] Has connector on both sides. Can connect to general purpose drive unit via Mitsubishi terminal block. |
Konektor untuk kabel I/O yang diproduksi sendiri (kabel listrik atau alat crimping tidak disertakan.)
| Model | Deskripsi | |
|---|---|---|
 |
FX2C-I/O-CON | [Flat Cable Connector] AWG28 (0.1 mm2): A set of 10 pcs Crimp connector: FRC2-A020-3OS 1.27-pitch 20 cores Crimp tool: Separately arrange the tool manufactured by DDK Ltd. 357J-4674D Main Unit 357J-4664N Attachment |
 |
FX2C-I/O-CON-S | [Connector for bared wire] AWG22 (0.3 mm2): 5 sets Housing: HU-200S2-001 Crimp contact: HU-411S Crimp tool: A product manufactured by DDK Ltd. is separately required. 357J-5538 |
| FX2C-I/O-CON-SA | [Connector for bared wire] AWG20 (0.5 mm2): 5 sets Housing: HU-200S2-001 Crimp contact: HU-411SA Crimp tool: A product manufactured by DDK Ltd. is separately required. 357J-13963 |
|
Kabel sambungan ekstensi
| Model | Length | Deskripsi | |
|---|---|---|---|
 |
FX2N-GM-65EC | 65 cm | [Connection extension cable between PLC and FX2N-10GM/FX2N-20GM] One cable can be used in a system. Standard connection cable (55 mm) is included with FX2N-10GM/FX2N-20GM. |
| F2-RS-5CAB | 5 m | [Resolver extension cable for FX2N-1RM] Resolver can be extended up to 100 m extension by linking multiple cables. |
|
Kabel koneksi untuk perangkat periferal
| Model | Length | Deskripsi | |
|---|---|---|---|
 |
(1) E-20TP-CAB0 | 3 m | [E-20TP connection cable] FX2N-10GM/FX2N-20GM (MINI DIN 8-pin) ⇔ E-20TP (MINI DIN 8-pin) Cable length is different between (1) and (2). (1) E-20TP-CAB0 (3 m) is included with E-20TP-SET0. |
| (2) FX-20P-CAB0 | 1.5 m | ||
Suku cadang
| Model | Length | Deskripsi |
|---|---|---|
| FX2N-GM-5EC | 55 mm | [Connection cable between PLC and FX2N-10GM/20GM] One cable is included with FX2N-10GM/20GM. |